Nanotechnology Virtual 2020

Biography

Joined the Chemical Engineering Department in Fall 2012. The primary focus of our research is the design, synthesis, and evaluation of nanomaterials for various medical applications. This includes self-assembled chemistries, nanoparticles, nanotubes, and nanostructured surfaces. Medical applications include inhibiting bacteria growth, inflammation, and promoting tissue growth. Tissues of particular interest are bone, cartilage, skin, nervous system, bladder, cardiovascular, and vascular. There is also an interest in anti-cancer applications where nanomaterials can be used to decrease cancer cell functions without the use of pharmaceutical agents. There is also a large interest in developing in situ sensors which can sense biological responses to medical devices and respond in real time to ensure implant success. Lastly, there is an interest in understanding the environmental and human health toxicity of nanomaterials.

Biography

Raymond C. Jagessar obtained his BSc (Distinction) in Chemistry/Biology from the University of Guyana (1992) and his PhD from the UK (1995). He held three Post Doctoral Research Fellowships at the University of South Carolina (USA), Wichita State University (USA) and the University of the West Indies (1996-1999). He has also won several international awards, amongst them are Chartered Chemist, CChem and Fellow of the Royal Society of Chemistry, FRSC, UK. His research interests are broad, covering the spectrum of Pure and Applied Chemistry, Chemical Biology, Pharmaceutical and Medicinal Chemistry. He has published over seventy (70) research articles, five book chapters and presented at several international conferences. He is currently Professor in Chemistry at the University of Guyana (South America)

Biography

Ph.D. obtained in 2005 from Jagiellonian University. In the years 2008-2011 Scholarship holder of the Japan Society for the Promotion of Science at the National Institute of Advanced Industrial Science and Technology (AIST) in Tsukuba. Her research works are focus on the synthesis of composite materials and investigation of their properties.

Biography

Dr. Fan is a Professor of the School of Physics, Liaoning University, and also the Deputy Dean of the Lvyuan Institute of Energy & Environmental Science and Technology. He got his B.Sc. in physics from Liaoning University in 2003 and his Ph.D from the Department of Materials Science and Engineering of Nanjing University in 2008. From 2008 to 2011, he was a postdoctoral fellowship in the School of Chemistry, Nanjing University, studying the synthesis of mesoporous multi-metal oxides. Currently, he researches hydrogen generation, catalytic degradation of organic and inorganic gaseous pollution by using light and heat energy, the synthesis of porous catalyst and defect mediated photocatalyst. In the above fields, he published 40 papers in international journals and was awarded 4 CN patents.

Biography

Will be updated soon.!

Biography

Dr Pellicane is an Assistant Professor in the BIOMORF department, at the University of Messina (Italy) and a honorary Associate Professor in the School of Chemistry and Physics, at the University of Kwazulu-Natal (South Africa), where he has been working since 2011 before moving to Italy. He is the author of more than 60 peer-reviewed articles indexed in the web of Science – core collection database. His field of expertise is the theory and computer simulation of simple/complex fluids

Biography

Will be Updated Soon.!

Biography

Will be updated soon!

Biography

Pranshu Kumar Gupta, after being B.Sc. (Hons.) gold medalist, is currently pursuing M.Sc. in Chemistry (Inorganic) and is working as a post-graduate project student under the supervision of Prof. (Distin.) Lallan Mishra at Department of Chemistry (CAS), Institute of Science, Banaras Hindu University (BHU), Varanasi, UP, India. He has worked as Indian Academy of Sciences (2018) and JNCASR (2019) summer research fellow at IISc Bangalore and IISER TVM, under supervision of Dr. Mrinmoy De and Prof. (Bhatt. Awardee.) K. George Thomas, respectively. His research interests are computational green-nanochemistry, lattice induced chiral inversion, eco-friendly metal nanoparticle, carbon quantum-dot synthesis: metal/bio-stabilizer induced bioactivity, surface-enhanced catalysis and confinement-controlled photochemistry.

Biography

Dr. Mubarak Ali has pursued his Post-Doctoral Research in Satellite Research Centre, Nanyang Technological University, Singapore. His Post-Doctoral Research work was associated with Encapsulated Sandwich Composites for Thermal Coupling in Satellite Applications. He has accomplished his Ph.D in School of Mechanical & Aerospace Engineering in Nanyang Technological University, Singapore with Nanyang Research Scholarship. His Ph.D research work dealt with Impact Damage and Scarf Repair of Laminated Composites with Dispersed Core/Shell Thermoplastic Particles. His Ph.D Supervisor was Associate Professor Sunil C Joshi. He has completed his M.S. (by Research) in IIT Madras, in Department of Metallurgical and Materials Engineering. His M.S. Research dealt with Fretting Wear and Fretting Fatigue Analysis of Plasma Nitrided Ti-6Al-4V & AISI 304 Stainless Steel for Aerospace Application. His M.S. Research Supervisor was Professor Ganesh Sundara Raman, Department of Metallurgical and Materials Engineering, IIT Madras. He holds a B.Tech Degree in Production Engineering from Madras Institute of Technology (MIT), Anna University Campus, Chennai.  His Final Year Undergraduate Research Project involved Vibration Analysis of Microsatellite Satellite Structure, which forms a part of early stage analysis of ANUSAT Satellite program. ANUSAT was an Ambitious Indian Student Research Microsatellite, which was designed, developed & integrated at Department of Aerospace Engineering, Madras Institute of Technology (MIT), Chrompet, Anna University during 2002-2009. ANUSAT Satellite  His Biography has been listed in MARQUIS WHO’S WHO IN THE WORLD, 2014, 31st Edition, VIP Number: 36728040. He is currently working as Assistant Professor in Mechanical Engineering, in TKM College of Engineering, a prestigious institution in south India, affliated to Kerala Technological University. TKM College of Engineering has signed a MoU with Universiti Teknologi Malaysia (UTM) during May 2019.  Dr. Mubarak Ali is in close contact with Dr. Shukur Abu Hassan of CACM (Centre for Advanced Composite Materials) UTM, Johor Bahru, and Dr. Normah Binti Mohd Gazali, Professor in Dept. of Thermofluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), Johor Bahru. 

Biography

Mrs. Sehrish Habib has done Masters in Materials and Surface engineering in 2014 from a renowned university, National University of Science and technology, Pakistan. She joined the current research group in 2018 in Center for advanced materials at Qatar university. Since then, she is working on smart coatings for corrosion protection applications in oil and gas field. She published few research papers as well in reputed journals.

Biography

Dr. Adeleke Abdulrahman Oyekanmi is a research fellow at the School of Industrial technology, Universiti Sains Malaysia. His core expertise are in water and wastewater management by creating sustainable treatment technologies.  He is a researcher of repute with vast experiences in environmental management, pollution analysis, modelling and optimization of process variables for enhanced operational system. His expertise includes water quality assessment and prediction of surface and sub-surface storm water pollution using geographical information systems, modelling of water quality parameters, wastewater treatments and solid wastes management. His works on new processes development, mathematical modelling and optimization are well documented in reputable international journals in the web of sciences. His works have earned him numerous laurels and awards some of which include the winner of a silver medal in 2015 (Best Paper Research), silver medal in 2016 (Innovative Product Research) organized by the Office of Research, Innovation and Commercialization and Consultancy Service (ORICC), Universiti Tun Hussein Onn Malaysia, He is a gold medallist (Environmental and Renewable Energy Category) at the 27th International Invention and Technology Exhibition (ITEX Malaysia) in 2016 and also a gold medal recipient at the Seoul International Invention Fair (SIFF South Korea). He is also a regular reviewer for high impact factor journals among which are Bioresource Technology, Journal of Cleaner Production, Journal of Water Processing Engineering, Journal of Chemical and Biotechnology, Journal of Oil Palm Research, Journal of soil and sediment, Heliyon. He is the recipient of the grand price as ‘the outstanding reviewer of the month’ of November 2018 for the Journal of Cleaner Production. He is an accomplished team player and a technocrat with problem solving skills and excellent service delivery across projects in environmental, civil and water engineering chain with the overriding aim of making impactful contribution towards ensuring safe, secured and sustainable environment.

Biography

Will be Updated Soon

Biography

Dr Woo has a BS and MS in Mechanical Engineering, and he has obtained PhD in Mechanical Engineering from Texas A&M. He major in energy system such as HVAC and its heat transfer, optimal design and control of refrigerator, reliability design of thermal components, and failure Analysis of thermal components in marketplace using the Non-destructive such as SEM & XRAY. In 1992.03–1997 he worked in Agency for Defense Development, Chinhae, South Korea, where he has researcher in charge of Development of Naval weapon System. He was working as a Senior Reliability Engineer in Refrigerator Division, Digital Appliance, SAMSUNG Electronics.

Biography

Ginil Mon (37 yrs.) a chemist who has specialized in Polymer Chemistry got his doctorate for his thesis “Thermal And Mechanical Characteristics of Novel Peroxide-Cured Ethylene Propylene Diene Terpolymer-Neoprene Composite Films with Clay/Graphite Fillers” from the Manonmaniam Sundaranar University. His paper presented in Indraprastha International Conclave on Nano Science and Technology, New Delhi during November 16-17, 2010 was adjudged the best. He has ten publications to his credit with total impact factor 13.464, 75 citations, h-index 4 and i10-index 4. An International Resource Person in diverse topics including Environment and ICT, he is working in Nanotechnology, Polymer Nanocomposites, Spectroscopy and Molecular Docking. A fellow of Indian Science Congress, member of editorial board for journals, he is also reviewer in five international journals which includes Elsevier journals too. Being an organizing committee member of many international conferences notably in Sanyo, China and Singapore, he has been an invited speaker in eight national and four international conferences including one at Singapore. Currently he is teaching in the Department of Chemistry and Research, Nesamony Memorial Christian College, Marthandam near Cape Commorin.

Biography

Will be updated soon!

Biography

Will be updated soon.!

Biography

Will be updated shortly!

Biography

will be updated shortly!

Biography

Dr. Nataliya Pryadko, is a leading researcher in the Department of Thermogasdynamic of Energy Plant of Institute of Technical Mechanics of NASU, Ukraine. She has worked in the field of mineral processing and nanotechnology of jet grinding for 14 years. She has authored for more than 150 publications and holds 15 issued patents. Dr Genadiy Strelnikov is a professor and director of the Department of Thermogasdynamic of Energy Plant of Institute of Technical Mechanics of NASU, Ukraine. He has worked in the field of rocket engine technology for 40 years. He has authored for more than 160 publications and holds 25 issued patents. Currently, he is the Scientific Leader for three major research projects from the National Academy of Science of Ukraine, the research group is focused on the development of various ground nanomaterial applications and modification of jet grinding technology.

Biography

Will be updated shortly!

Biography

Dr. Zaidi working as Asso. Prof. in Dept. of Physics at the University of Batna 1. He obtained a doctorate in Physics at the University of Annaba in 2014. He has published a number of research papers in reputed journals, has written three books on solar cells. He acted as an Editor-in-Chief of IJMSA (From 2017 to 2018). He is a potential reviewer for reputed journal papers. He participated in many international conferences serving as a referee, PC member... etc. He is also an Editorial Board member of numerous journals

Biography

will be updated soon!